MC4 PV cable connector , 1000V, waterproof IP 67 solar power cable connector, used for 4mm2 solar cable.

1.TUV Approval 2.Factory price,Fast delivery 3.Quick,reliable,effective field assembly 4. Waterproof IP67 5.UV resistant

MC4 PV cable connector , 1000V, waterproof IP 67 solar power cable connector, used for 4mm2 solar cable.               

Welcome to our Aliexpress store:

http://www.aliexpress.com/item/Free-shipping-MC4-solar-connector-male-and-female-TUV-certification-waterproof-IP67/629023798.html

Technical Data

Rate voltage	1000V
Rated current	25A(2.5mm2) , 30A(4mm2,6mm2)
Test voltage	6KV(50Hz)
Protect degree	IP67
Insulation material	PPO
Contact material	Copper sliver plated
Operating temperature	-40°C~+90°C
Safe class	Ⅱ
Flame class	UL94-V0
Contact resistance of plug connectors	≤5mΩ
Insertion force	≤50N
Withdraw force	≥50N
Suitable cable	2.5mm2/4mm2/6mm2(AWG14/12/10)
Locking system	Snap in
Drawing

Description

1. Acc.to DIN V VDE V 0126-3/12.06,UL1703 standard.

2. highly robustness,UV-Resistance,

3. Connector adopts touch and insertion of reed with inner-knob type.

4. Auto-lock equipment of male and female points enable connection more easy and reliable. 

5. Popular figure suit most of field installation

6. Simple on-site processing

7. Accommodates PV cable with deferent insulation diameters

8. High current carrying capacity

Picture of product

Assembly Instructions

1. During self assembly, parts and tools other than those stated by TOP HENGDA are used or if the preparation and assembly instructions described here are disregarded then neither safety nor compliance with the technical data can be guaranteed.

2. For protection against electric shock, PV connectors must be isolated from the power supply while being assembled or disassembled.

3. The end product must provide protection from electric shock.

4. Unplugging under load: PV plug connections muct not be unplugged while under load. They can be placed in a no load state by switching off the DC/AC converter or breaking the AC circuit interrupter. Plugging and unplugging while under voltage is permitted.

5. Disconnected connectors should be protected from dirt and water with sealing caps.

6. Plugged parts are watertight IP67

1. Push the crimped contact into the socket resp. Plug insulator until it engages. Pull lightly on the lead to check that the metail part has engaged.

2. Screw on the cable gland, hand-tight, with the tools PV-STX,tightening torque about:2.2 Nm.

3. Mount the connector together until they engage.Check correct engagement by pulling on the coupling

4. Compress the two snap-in springs by hand or with the PV-STX tool and separate the coupling

MC4 PV cable connector , 1000V, waterproof IP 67 solar power cable connector, used for 4mm2 solar cable.